SBC81613 Socket 370 All-in-One CPU Card Series User
’
s Manual
BIOS Configuration
51
7.6 Integrated
Peripherals
This option sets your hard disk configuration, mode and port.
Phoenix – AwardBIOS COMS Setup Utility
Integrated Peripherals
OnChip IDE Channel0
[Enabled]
Item Help
OnChip IDE Channel1
[Enabled]
IDE Prefetch Mode
[Enabled]
Menu Level
f
Primary Master PIO
[Auto]
Primary Slave PIO
[Auto]
Secondary Master PIO
[Auto]
Secondary Slave PIO
[Auto]
Primary Master UDMA
[Auto]
Primary Slave UDMA
[Auto]
Secondary Master UDMA
[Auto]
Secondary Slave UDMA
[Auto]
Init Display First
[PCI Slot]
IDE HDD Block Mode [Enabled]
Onboard Lan Boot ROM
[Disabled]
Onboard FDD Controller
[Enabled]
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Seiral Port 2
[2F8/IRQ3]
UART 2 Mode
[Standard]
X IR Function Duplex
Half
X TX,RX inverting enable
No, Yes
Onboard Parallel Port
[378/IRQ7]
Onboard Parallel Mode
[Normal]
ECP Mode Use DMA
[3]
Parallel Port EPP Type
[EPP1.9]
Onboard Legacy Audio
[Disabled]
X Sound Blaster
[Disabled]
X SB I/O Base Address
220H
X SB IRQ Select
IRQ 5
X SB DMA Select
DMA 1
ÇÈÆÅ
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
z
On-Chip IDE Channel0/Channel1
The integrated peripheral controller contains an IDE
interface with support for two IDE channels. Select
Enabled
to activate each channel separately.
z
IDE Prefetch Mode
The onboard IDE drive interfaces support IDE prefetching
