NA580 Series User
’s Manual
62
LAN Module Expansion
Limitation: The PCIe devices are total 14 devices. Therefore user should
check how many LAN chip configuration are installed in NA580.
Note: When the system is turned on, you can select LAN bypass function by Jumper and
Bios when power on state, when enter the OS, you can select LAN bypass function
at power on/ off state by software ,the detail information please refer to the appendix
A.
LED Definition
AX93316
LAN bypass LED
LAN bypass LED
While running the LAN By-Pass function, the LED always lights up.
Active LED (Single color)for for LAN port #1, port#2, port#3, port#4, port #5, port#6,
port#7, port#8
The orange LED is on when the LAN port connection is working.
The LED flashes when transmitting or receiving any signals to or from the appliance.
The LED is dark when the appliance is off.
Link LED for LAN port #1, port#2, port#3, port#4, port#5 and port#6, port#7, port#8
The double-color LED light indicates 10/100/1000Mbps transfer rate.
When the orange-color LED light is radiating, it should be 1000Mbps transfer rate.
When the green-color LED light is radiating, it should be 100Mbps transfer rate.
If the Link LED is dark and Active LED is light on or flashing, it should be 10Mbps
transfer rate.
When this LED and Link / Active LED both are dark. No networking devices are attached
Transfer Rate
LED Light Color
10Mbps
Dark
100Mbps
Green
1000Mbps
Orange
Summary of Contents for NA580 series
