MANO500 Mini ITX Motherboard
Watchdog Timer
53
Appendix A
Watchdog Timer
B.1
About Watchdog Timer
Software stability is major issue in most application. Some embedded systems are not
watched by human for 24 hours. It is usually too slow to wait for someone to reboot when
computer hangs. The systems need to be able to reset automatically when things go wrong.
The watchdog timer gives us solution.
The watchdog timer is a counter that triggers a system reset when it counts down to zero from
a preset value. The software starts counter with an initial value and must reset it periodically. If
the counter ever reaches zero which means the software has crashed, the system will reboot.
B.2
Sample Program
1. Enter
ADU
, and press <F4> to select the
superior ITE
2.
PORT
setting
002E, 002F
3. Address
07h
setting
07 GPIO
4. Address
72h
to set the countdown, for example Sec:
C0
, Min:
40
5. Address
73h
set the countdown time, for example 10sec:
0A
Summary of Contents for MANO500 Series
