MANO500 Mini ITX Motherboard
20
Board and Pin Assignments
2.4.13
Front Audio Header (CN16)
This is front audio header (5x2-pin p=2.00mm) for convenient connection and control of
audio devices.
2.4.14
LVDS Backlight Control Header (CN17)
This is an 8x1-pin p=1.25mm header for LVDS backlight control interface.
Note
LVDS backlight control header P/N (CN17): GEAN-LEA electronic
GLA1252WV-S-8P.
[*]
: This signal is selectable by jumper JP8, see section 2.3.6.
2.4.15
Keyboard and Mouse Header (CN18)
This is a 6x1-pin p=2.00mm header for keyboard and mouse interface.
Pin Signal
Pin
Signal
1
MIC_IN
2
GND
3
LINE_IN_L
4
GND
5
LINE_IN_R
6
GND
7
AUD_OUT_L
8
GND
9
AUD_OUT_R
10
GND
Pin
Signal
1
+12V
2
+12V
3
+5V
4
LVDS_BKL_EN
5
GND
6
GND
7
GND
8
LVDS_BKL_CTL
[*]
Pin Signal
Pin
Signal
1
KB_CLK
2
KB_DATA
3
MS_CLK
4
GND
5
+5V
6
MS_DATA
Summary of Contents for MANO500 Series
