AXIOMTEK MANO500 Series, User Manual

Page: 18 / 63

MANO500 Mini ITX Motherboard
12 Board and Pin Assignments
LAN
USB
2.4.1 Audio Jack (CN2)
The motherboard provides HD audio jack on the rear I/O. Install audio driver, and then
attach audio devices to CN2.
2.4.2 LAN and USB 3.0 Connectors (CN3 and CN4)
The motherboard comes with two high performance plug and play Ethernet interfaces
(RJ-45) which are fully compliant with the IEEE 802.3 standard. Connection can be
established by plugging one end of the Ethernet cable into this RJ-45 connector and the
other end to a 1000/100/10 Base-T hub.
The Universal Serial Bus (compliant with USB 3.0) connectors on the rear I/O are for
installing USB peripherals such as keyboard, mouse, scanner, etc.
Note

Speed LED turns orange for 1000Mbps or green for 100Mbps.

CN3 supports AMT when chipset is customized into Intel
®
Q170 and
Wake-on-LAN.
Pin Color Signal
Green Line-out
Pink MIC-in
Pin LAN Signal Pin LAN Signal
L1
Tx+ (Data
transmission positive)
L2
Tx- (Data transmission
negative)
L3
Rx+ (Data reception
positive)
L4
RJ-1 (For 1000 Base-T
only)
L5 RJ-1 (For 1000
Base-T only) L6 Rx- (Data reception
negative)
L7 RJ-1 (For 1000
Base-T only) L8 RJ-1 (For 1000 Base-T
only)
A Active LED B Speed LED
Pin USB Signal Pin USB Signal
1 USB3_POWER 2 USB -
3 USB + 4 GND
5 USB3_SSRX 6 US
7 GND 8 USB3_SSTX
9 US