AXIOMTEK IPC962-511-FL Series, User Manual

Page: 24 / 104

IPC962/IPC964 Series U
ser’s Manual
16 Introduction
The Universal Serial Bus connectors are compliant with USB 3.0 (5Gb/s), and ideally for
installing USB peripherals such as scanner, camera and USB devices, etc.
Pins Signal USB Port 0 Pins Signal USB Port 1
1
USB_VCC (+5V level standby
power)
10
USB_VCC (+5V level standby power)
2 USB_Data2-
11 USB_Data3-
3 US
12 US
4 GND
13 GND
5 SSRX2-
14
SSRX3-
6 SSRX2+
15
SSRX3+
7 GND
16 GND
8 SSTX2-
17
SSTX3-
9 SSTX2+
18
SSTX3+
1.7.3 VGA Connector (CN6)
The CN9 is a 15-pin D-Sub connector which is commonly used for CRT monitor.
Pins Signals Pins Signals
1 Red 2 Green
3 Blue 4 N.C.
5 GND 6 DETECT
7 GND 8 GND
9 +5V 10 GND
11 N.C. 12 DDC DATA
13
Horizontal
Sync 14 Vertical Sync
15 DDC CLK