background image

IFO2175-873 Series User’s Manual 

 

BIOS Setup Utility 

45 

3.8 

The Save & Exit menu allows users to load your system configuration with optimal or fail-safe 
default values. 

Save & Exit Menu 

 

Save Changes and Exit

 

When you have completed the system configuration changes, select this option to leave Setup 
and return to Main Menu. Select Save Changes and Exit from the Save & Exit menu and 
press <Enter>. Select Yes to save changes and exit.

 

 

Discard Changes and Exit

 

Select this option to quit Setup without making any permanent changes to the system 
configuration and return to Main Menu. Select Discard Changes and Exit from the Save & Exit 
menu and press <Enter>. Select Yes to discard changes and exit.

 

 

Save Changes and Reset

 

When you have completed the system configuration changes, select this option to leave Setup 
and reboot the computer so the new system configuration parameters can take effect. Select 
Save Changes and Reset from the Save & Exit menu and press <Enter>. Select Yes to save 
changes and reset.

 

 

Discard Changes and Reset

 

Select this option to quit Setup without making any permanent changes to the system 
configuration and reboot the computer. Select Discard Changes and Reset from the Save & 
Exit menu and press <Enter>. Select Yes to discard changes and reset. 

Summary of Contents for IFO2175-873 Series







































































Reviews: