AXIOMTEK IFO2175-873 Series User Manual Download Page 65

Page: 65 / 70

IFO2175-873 Series User’s Manual

Intel iAMT Settings

APPENDIX B

INTEL iAMT SETTINGS

The Intel

Active Management Technology (Intel

iAMT) has decreased a major barrier to IT

efficiency that uses built-in platform capabilities and popular third-party management and
security applications to allow IT a better discovering, healing, and protection their networked
computing assets.

In order to utilize Intel

iAMT you must enter the ME BIOS (<Ctrl + P> during system startup),

change the ME BIOS password, and then select “Intel

iAMT” as the manageability feature.

Entering MEBx

You must go to BIOS to enable Intel

Exit from BIOS after starting Intel

iAMT function.

iAMT, and press <Ctrl + P> to enter MEBx Setting.

Note: It is better to press <Ctrl + P> before the screen popping out.

Summary of Contents for IFO2175-873 Series







































































Search results

Summary of Contents for IFO2175-873 Series

Reviews:

Related manuals for IFO2175-873 Series

Brands by name

Popular brands

AXIOMTEK IFO2175-873 Series, User Manual

Search results

Summary of Contents for IFO2175-873 Series

Reviews:

Related manuals for IFO2175-873 Series

Brands by name

Popular brands