AXIOMTEK GOT5103W-845, User Manual

Page: 50 / 66

GOT5103W-845
User’s Manual
44 Drivers Installation
4.2 Touch Screen
The GOT5103W-845 usesr projected capacitive multi-touch . There are the specification and
driver installation which are listed below.
It also can drive the touch panel to get ten fingers touch function that based on the Windows 7
support.
4.2.1 Specification
Touch Screen Projected capacitive multi-touch
Touch Control Board
COF
Communications
USB interface
Power Supply 5V
Power Consumption
40mA
Input Method Finger or Cap.Stylus
Resolution
25ppi(Min.)
Note: Base on WIN7 definition, ppi(Pixcel per inch)
Win7 USB Driver Non-Driver
Calibration Non-Calibration
NOTE The projected capacitive multi-touch can drive the touch panel to get ten fingers
touch function that based on the Windows 7 & Windows 8.x support.
4.2.2 Driver Installation- Windows 7/8.X/10
The GOT5103W-845 (resistive touch model )provides a touch screen driver that users can
install it under the operating system Windows 7/8.x/10. To facilitate installation of the touch
screen driver, you should read the instructions in this chapter carefully before you attempt
installation.
1.
Insert Driver CD and follow the path to select the “\Drivers\Step 8 – Penmount Touch
driver
”.