ETM710 VIA V4 ETX v3.0 SoM User’s Manual
48
Award BIOS Utility
4.10 PnP/PCI Configuration Setup
This section describes the configuration of PCI (Personal Computer
Interconnect) bus system, which allows I/O devices to operate at
speeds close to the CPU speed while communicating with other
important components. This section covers very technical items that
only experienced users could change default settings.
z
PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play
aware (e.g., Windows 95). The default value is
“No”
.
z
Reset Configuration Data
Normally, you leave this item Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD) when you exit Setup
or if installing a new add-on cause the system reconfiguration a
serious conflict that the operating system can not boot. Options:
Enabled, Disabled.
z
Resources Controlled By
The Award Plug and Play BIOS can automatically configure all
boot and Plug and Play-compatible devices. If you select Auto, all
interrupt request (IRQ), DMA assignment, and Used DMA fields
Summary of Contents for ETM710 Series
Page 1: ...ETM710 Series VIA V4 ETX v3 0 SoM with Multiple I O Features User s Manual...
Page 8: ...ETM710 VIA V4 ETX v3 0 SoM User s Manual 4 Introduction MEMO...
Page 10: ...ETM710 VIA V4 ETX v3 0 SoM User s Manual 6 Board Layout and Pin Assignments Solder Side...
Page 26: ...ETM710 VIA V4 ETX v3 0 SoM User s Manual 22 Hardware Description Memory Map under XP OS 2...