AXIOMTEK ETM710 Series, User Manual, Page: 45 / 60

ETM710 VIA V4 ETX v3.0 SoM User’s Manual
Award BIOS Utility
41
¾ UAR2 Duplex Mode
The second serial port offers these infrared interface
modes:
1.
IrDA
2.
ASKIR IrDA-compliant serial infrared port
3.
Normalo (default value)
NOTE
:
The UART Mode Select will not appear on the
menu once you disable the setting of Onboard
Serial Port 2.
¾ Use IR Pins
Use this item to set up IR devices based on the IR pin
definitions.
¾ Onboard Paralellel Port
This item allows you to determine the I/O address for
onboard parallel port. Options: 378H/IRQ7, 278H/IRQ5,
3BC/IRQ7 and Disabled.
¾ Parallel Port Mode
Select an operating mode for the onboard parallel (printer)
port. Select Normal unless your hardware and software
require another mode in this field. Options: EPP1.9, ECP,
SPP, ECPEPP1.7, EPP1.7.
¾ EPP Mode Select
Select EPP port type 1.7 or 1.9.
¾ ECP Mode Use DMA
Select a DMA channel for the parallel port while using the
ECP mode.
Press <Esc> to return to the Integrated Peripherals page.