ETM710 VIA V4 ETX v3.0 SoM User’s Manual
Award BIOS Utility
45
z
Moden Use IRQ
If you want an incoming call on a modem to automatically resume
the system from a powersaving mode, use this item to specify the
interrupt request line (IRQ) used by the modem. You might have to
connect the fax/modem to the board Wake On Modem connector
for working this feature.
z
Soft-Off by PWR-BTTN
This option only works with systems using an ATX power supply. It
also allows users to define which type of soft power OFF sequence
the system will follow. The default value is
“Instant-Off”
.
Instant-Off
This option follows the conventional manner of system
performance when turning the power to OFF. Instant-
Off is a software power OFF sequence requiring the
power supply button is switched to OFF.
Delay 4 Sec.
Upon the system’s turning OFF through the power
switch, this option will delay the complete system power
OFF sequence approximately 4 seconds. Within this
delay period, the system will temporarily enter into the
Suspend Mode enabling you to restart the system at
once.
z
Ac Loss Auto Restart
This setting specifies whether your system will reboot after a power
failure or interrupt occurs. Available settings are:
Off
Leaves the computer in the power off state.
On
Leaves the computer in the power on state.
Former-sts
Restores the system to the status before power failure
or interrupt occurred.
Summary of Contents for ETM710 Series
Page 1: ...ETM710 Series VIA V4 ETX v3 0 SoM with Multiple I O Features User s Manual...
Page 8: ...ETM710 VIA V4 ETX v3 0 SoM User s Manual 4 Introduction MEMO...
Page 10: ...ETM710 VIA V4 ETX v3 0 SoM User s Manual 6 Board Layout and Pin Assignments Solder Side...
Page 26: ...ETM710 VIA V4 ETX v3 0 SoM User s Manual 22 Hardware Description Memory Map under XP OS 2...