AXIOMTEK eBOX700-891-FL Series, User Manual

Page: 36 / 70

eBOX700-891-FL Series u
ser’s Manual
Jumper & Connector Settings
28
3.3.3 DisplayPort Connector (CN4)
Pins Signals Pins Signals
1 DPB_LANE0 11 GND
2 GND 12 DPB_LANE3#
3 DPB_LANE0# 13 Detect Pin
4 DPB_LANE1 14 GND
5 GND 15 DPB_AUX
6 DPB_LANE1# 16 GND
7 DPB_LANE2 17 DPB_AUX#
8 GND 18 DPB_HPDE
9 DPB_LANE2# 19 GND
10 DPB_LANE3 20 +3.3V
3.3.4 Serial Port Connector (CN18/CN19)
The system has two serial ports. COM1~COM2 are RS-232/422/485 ports. Please refer to
Chapter 4 for the detail of BIOS setting.
※
COM1 (CN18),COM2 (CN19)
Pins RS-232 RS-422 RS-485
1 DCD, Data Carrier Detect TX- Data-
2 RXD, Receive Data
TX+ Data+
3 TXD, Transmit Data
RX+ No use
4 DTR, Data Terminal Ready RX- No use
5 GND, Ground
No use No use
6 DSR, Data Set Ready No use No use
7 RTS, Request To Send
No use No use
8 CTS, Clear To Send
No use No use
9 RI, Ring Indicator No use No use