AXIOMTEK eBOX620-841-FL Series, User Manual

Page: 3 / 70

iii
Safety Precautions
Before getting started, please read the following important safety precautions.
1.
The eBOX620-841-FL does not come with an operating system which must be loaded
first before installation of any software into the computer.
2.
Be sure to ground yourself to prevent static charge when installing any internal
components. Use a wrist grounding strap and place all electronic components in any
static-shielded devices. Most electronic components are sensitive to static electrical
charge.
3.
Disconnect the power cord from the eBOX620-841-FL prior to making any installation.
Be sure both the system and all external devices are turned OFF. Sudden surge of
power could ruin sensitive components. Make sure the eBOX620-841-FL is properly
grounded.
4.
Make sure the voltage of the power source is correct before connecting it to any power
outlet.
5.
Turn Off system power before cleaning. Clean the system using a cloth only. Do not
spray any liquid cleaner directly onto the screen.
6.
Do not leave equipment in an uncontrolled environment where the storage temperature
is below -40
℃
or above 80
℃
as it may damage the equipment.
7.
Do not open the system’s back cover. If opening the cover for maintenance is a must,
only a trained technician is allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
 Before handling a board or integrated circuit, touch an unpainted portion of the
system unit chassis for a few seconds. This will help discharge any static electricity on
human body.
 When handling boards and components, wear a wrist grounding strap available from
most electronic component stores.