AXIOMTEK DSB320-842 Series, User Manual

Page: 37 / 75

DSB320-842User’s Manual
Jumper Settings & Connector
29
3.2 Jumper Settings
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on
2 jumper pins to close. And remove jumper clip from 2 jumper pins to open. Below illustration
shows how to set up jumper.
Properly configure jumper settings on the CAPA841/842 to meet your application purpose.
Below you can find a summary table of all jumpers and onboard default settings.
Note
Once the default jumper setting needs to be changed, please do it under power-
off condition.
Jumper Description Jumper Setting
JP2 Audio Output Selection (Line out) 1-3, 2-4 Close
JP4
Restore BIOS Optimal Defaults
Default: Normal Operation
1-2 Close
JP10
Auto Power On
Default: Disable
1-2 Close
JP12
COM1 Data/Power Selection
Default: RS-232 Data
COM1 Pin 1: DCD 3-5 Close
COM1 Pin 9: RI 4-6 Close