AXIOMTEK CAPA315 User Manual Download

Page: 9 / 67

CAPA315 3.5

” Board

Introduction



Ethernet



Two RJ-45 LAN ports: Intel

i211AT supports 1000/100/10Mbps Gigabit/Fast

Ethernet with Wake-on-LAN and PXE Boot ROM.



Audio



HD audio compliant with Realtek ALC662.



Line-out and line-in/MIC-in via internal box header.



Expansion Interface



One full-size PCI-Express Mini Card socket complies with PCI-Express Mini Card
Spec. V1.2.



Power Input



One 2x2-pin connector.



+12V DC-in only.



Auto power on function supported.



Power Management



ACPI (Advanced Configuration and Power Interface).



Form Factor



3.5

” form factor.

Note

All specifications and images are subject to change without notice.

1.3

Utilities Supported



Chipset and graphics driver



Ethernet driver



Audio driver



Trusted Execution Engine

Summary of Contents for CAPA315




































































Search results

Summary of Contents for CAPA315

Reviews:

Related manuals for CAPA315

Brands by name

Popular brands

AXIOMTEK CAPA315, User Manual

Search results

Summary of Contents for CAPA315

Reviews:

Related manuals for CAPA315

Brands by name

Popular brands