AXIOMTEK CAPA315, User Manual

Page: 22 / 67

CAPA315 3.5
” Board
16 Board and Pin Assignments
2.4.12 USB 3.0 Ports (CN17 and CN18)
The Universal Serial Bus (compliant with USB 3.0 (5Gb/s)) connector on the rear I/O is
for installing USB peripherals such as keyboard, mouse, scanner, etc.
2.4.13 Ethernet Ports (LAN1 and LAN2)
The board has two RJ-45 Ethernet connectors: LAN1 and LAN2. Connection can be
established by plugging one end of the Ethernet cable into this RJ-45 connector and the
other end (phone jack) to a 1000/100/10-Base-T hub.
Pin Signal Pin Signal
1 USB_VCC (+5V ) 10 USB_VCC (+5V )
2 USB #0_D- 11 USB #1_D-
3 USB #0_D+ 12 USB #1_D+
4 GND 13 GND
5 SSRX0- 14 SSRX1-
6 SSRX0+ 15 SSRX1+
7 GND 16 GND
8 SSTX0- 17 SSTX1-
9 SSTX0+ 18 SSTX1+
Pin
1000
Base-T 100/10
Base-T
Description
L1 BI_DA+ TX+ Bidirectional or Transmit Data+
L2 BI_DA- TX- Bidirectional or Transmit Data-
L3 BI_DB+ RX+ Bidirectional or Receive Data+
L4 BI_DC+ N.C. Bidirectional or Not Connected
L5 BI_DC- N.C. Bidirectional or Not Connected
L6 BI_DB- RX- Bidirectional or Receive Data-
L7 BI_DD+ N.C. Bidirectional or Not Connected
L8 BI_DD- N.C. Bidirectional or Not Connected
A
Active Link LED (Yellow)
Off: No link
Blinking: Data activity detected
B
Speed LED
1000: Orange
100/10: Green/OFF