Pulse ----Pulse Waveform
Provide frequency ranges from 1
μ
Hz to 300KHz pulse waveform output.
-
The backlight of the key lights when the key is being chosen.
-
The “Frequency/Period”, “Amplitude/High level”, “Offset/Low level”,
“Pulse width/Duty” and “Delay” of the pulse waveform can be
adjusted.
Noise ----Noise Signal
Provide 50MHz bandwidth Gauss white noise output
-
The backlight of the key lights when the key is being chosen.
-
The “Variance” and “”Mean” of the noise signal can be adjusted.
Arb ----Arbitrary Waveform
Provide frequency ranges from 1
μ
Hz to 5MHz arbitrary waveform output.
-
It can output 48 kinds of waveforms: Sinc, index rose, exponential decline, tangent,
cotangent, inverse trigonometric, Guass and so on. Besides, it can output the arbitrary waveforms in
the U disk.
-
Users can on line edit (16Kpts) or edit through EsayWave arbitrary waveform and down load
them to the instrument.
-
The backlight of the key lights when the key is being chosen.
-
The “Frequency/Period”, “Amplitude/High level”, “Offset/Low level”, “Phase” of the arbitrary
waveform can be adjusted.
6. Number Keys
Those keys, including numbers from 0 to 9, radix points “.”, symbol keys “+/-”, are used to input
parameters. Pay attention: when you need to input a negative, you should input a symbol “-” before
you input the numbers.
