6. Offset
It shows each channel’s current waveform’s DC offset. After press corresponding Offset menu, use
number keys or knob to change the parameter value.
7. Phase
It shows each channel’s current waveform’s phase value. After press corresponding Phase menu, use
number keys or knob to change the parameter value.
8. Load
It shows each channel’s load scheme.
High Resistance: display “Hi-Z” Load: display default “50
Ω
”
9. Menu
It shows the corresponding operation menu of the current function which is being chosen. For
example: the picture above shows the function menu of “Sine” waveform.
