MECHANICAL DRAWING
OPTIONAL ACCESSORIES
NAC3FXW
Neutrik Powercon® TRUE1 (for power in)*
USB2CAN
PRONET network converter
NAC3MXW
Neutrik Powercon® TRUE1 (for power out)*
USB2CAND
Dual Port PRONET network converter
HTAC
Hand tool for tightening powerCON TRUE1*
DHSS10M20
Sub-Speaker ø35mm 1-1.7m Pole with Handle and M20 screw
NE8MCB
Neutrik Ethercon PLUG
KP210S
Sub-Speaker ø35mm 0.7-1.2m Pole with M20 screw
NC3MXXBAG
Neutrik XLR-M
COVERSW2100
Cover for SW2100A
NC3FXXBAG
Neutrik XLR-F
see
http://www.axiomproaudio.com/
for detailed description and other available accessories.
*Note: See assembly instruction downloadable from NEUTRIK WEB site at:
http://www.neutrik.com/
SPARE PARTS
AC103GS
100 mm Swivel Castor without brake
NAC3PX
Neutrik Powercon® TRUE1 Appliance inlet-outlet
94SPI10100
Locking Pin for AX12C
SCNACPX
Neutrik Rubber Sealing for NAC3PX
95MET300003
AX12C Bracket
91AMDSW2100
Amplifier module assembly
98SW2100WZ4
21’’ woofer - 4” VC - 4 ohm
4 x M5
Flat Head
Allen
Screws
4 x M6
Pan Head
Allen
Screws
Adjustable feet (turn to adjust the height)
51 cm 20.1"
76 cm
29.9"
77 cm
30.3"
M20 Pole Adaptor
IMPORTANT
To install the AX12C bracket on the SW2100A
use the screws already present on the fixing plate,
as shown in the figure.
When removing the AX12C bracket from the SW2100A
put back the screws in the threaded holes
as shown in the figure, in order to avoid air leakage.
