MC13192U Transceiver Module
User Guide
9
CSM, DEMO or Host MCU Board - Module Installation on Ribbon Cable
Ribbon Cable Installation notes:
1) Host MCU board MCU Port and MC13192U Module J1 connectors align for pins 1 –
24 into and out of the ribbon cable.
2)
The Host Board must be configured to supply regulated power on J1 pin 1 (+3.3V to
+5.5V) and pin 3 (Ground).
3)
Host board must apply the approved SMAC software package to operate the
MC13192U module.
4)
SPI interface bus clock should be reduced to 125KHz or less to compensate for
cable loading of signals.
5)
Use a pin header to convert socket style MCU Port on Demo boards to pin
connector, example part number: Sullins #PTC36DACN cut to 24 pins, or Samtec
#TSW-1-12-25-T-D
Supporting Platforms and Signal Charts
The following charts provide reference for the MC13912U module and various host
platform signal connections. The example platforms are supported by the SMAC version
4.2 or later example software. New platforms can be easily added by generating
appropriate the connection I/O header file in the SMAC example software and applying
operation with the standard interface signal names.
DEMO or Host MCU
Module
MC13192U
Module
Align Pin 1 and
pins 1 – 24.
Standard 24 pin IDC
ribbon cable with
connectors.
