Range - Resolution - Description
Diode - 1mV - Open voltage approx. 1.5V; Forward voltage drop approx. 0.5~0.8V
Continuity - Test 0.1Ω - Open voltage approx.0.45V; when less than 50Ω, the buzzer will sound.
Overload protection: 250V DC or AC peak value.
Note
• If the tested circuit is open, the display will show “OL”.
• In case of line continuity test, be sure to shut off the line power supply and discharge all capacitors.
• After the measurement is over, immediately disconnect the test probe and the tested circuit.
8.2.5. Capacitance measurement
• Turn the function/range SELECT switch capacitance range. Insert the red test probe and black test
probe into the respected “VΩHz” and “COM” ends.
• Simultaneously connect the test probe cables to the tested capacitor so the capacitance value will show
on the LCD.
• If the LCD display “OL”,it means over range, you should set the knob to a higher range.
• Read the measured result from the LCD.
Capacitance (C) Technical Indicators:
1 - Range
2 - Accuracy
3- Resolution
Overload protection: 250V DC or AC peak value.
