Operation instructions | SKF 40-00M | SKF 41-00M | Multituner | FM Quattro module/19” unit
10
2019-09-29 | Technical improvements, changes in design, printing- and other errors expected.
2.3.
Mounting and installation in a 19“rack
The 19 "units are mounted in a 19" rack.
Note:
For 19-inch rack mounting, there must be at least 5 cm clearance in front of and behind the unit.
Mount the unit with four fitting screws (1).
Installation example:
Install the device in compliance with the safety regulations defined by the EN 60728-11 standard.
Connect the output of the device to the established distribution network. Use a high-shielded coaxial cable
with an F connector.
If you are using several devices, the outputs must be connected with suitable combiners.
There has to be used galvanic isolator between the output connector and antenna network in Sweden and
Norway state area.
