1.4.
Output/modulators
The output channels of the modulators are allways neighbour channels
The
quattro module
has four output modulators and one RF output.
The first modulator can be set to any output channel between S2 and CH 69. The other three modulators are
automatically set by incrementing the output channels in accordance with the chosen channel spacing.
For example:
modulator 1
= Channel 21
modulators 2, 3 and 4
= Channels 22, 23 and 24
The
octo module
has eight output modulators. They are subdivided in two modulator groups of four modulators
each. The
octo module
has two RF outputs (each for one modulator group).
In both groups, the first modulator can be set to any output channel between S2 and CH 69. The next three
modulators of both modulator groups are automatically set by incrementing the output channels in accordance
with the chosen channel spacing.
For example:
group A
modulator 1
= Channel 21
modulators 2, 3 und 4
= Channels 22, 23 und 24.
group B
modulator 1
= Channel 25
modulators 2, 3 und 4
= Channels 26, 27 und 28.
1.5.
Graphical user interface
The settings of the modules can be changed via the user interface of the integrated web interface. To access the
user interface and thus configure the devices, you need a standard PC/laptop with a network interface and the
actual version of the installed web browser.
2016-10-31 | Technical changes, design modifications, errors and misprints are subject to change without prior notice.7
