2016-01-11 | © AXING AG Schweiz | Subject to change in design and type; errors and misprints reserved
23
3.5.3.
Changing the password
The default password should be changed right after commissioning the module. The default password can be
changed in the menu entry
Maintenance
>
Set New Password
.
The default password is:
Ramsen8262
.
Any new password must be 8-10 characters (letters and/or digits) long.
After changing the password, the module must be rebooted.
Then the enter password site will be displayed and the user must log in with the new password.
3.5.4.
Rebooting
Clicking the
Reboot
button reboots the module. After rebooting, the password must be entered again.
Information:
If SAT signals are temporarily unavailable (e.g. due to snow), the module will reboot every 10
minutes. This ensures that all configured programs will be available once the signal becomes available again.
3.5.5.
Erasing service data
Clicking the
Erase Service Data
button will erase the tuner settings from phase 2.
The set transponder data must be read again for tuners 1-4 by executing a scan.
