axing EoC 1-01 Ethernet over Coax Operation Instructions Manual Download Page 3

 

2015-01-01 | © AXING AG Schweiz | Konstrukions -, Typenänderung, Irrtümer und Druckfehler vorbehalten 

Safety instructions 

 

Do NOT use the device near water or in rooms with high humidity such as humid cellars or near swimming 

pools. 

 

Do NOT use the device outdoors. All connections must be located inside a building.  

 

Keep the device away from moisture, dust or corrosive liquids. 

 

Do NOT install the device, use it or perform maintenance during a thunderstorm. There is a risk of electric 

shock during thunderstorm. 

 

Connect ONLY appropriate accessories to the device. 

 

Make sure that all cables are connected to the correct port. 

 

Carefully lay the Ethernet, antenna and electric cables to ensure that nobody can step on or stumble over 

them. 

 

Do NOT cover the ventilation slots of the device since insufficient air supply may result in damage to the 

device. 

 

Do NOT place any objects on the device. Position the device in a place where NOBODY can step on it. 

 

Prior to maintenance or dismounting work, disconnect the Ethernet and electric cable from the device. 

 

In case of damage, interrupt the power supply. 

 

Do NOT try to repair the device. Contact your local retailer to order a new device. 

 

Do NOT open the device or unit. Opening the device or removing its covers causes risks, for example due 

to high voltage. This device should ONLY be repaired or uninstalled by qualified service personnel. For 

more information, contact your retailer. 

 

Summary of Contents for EoC 1-01 Ethernet over Coax

















Reviews: