AXIL MD 0274 E, User Manual

Page: 33 / 104

7 Need Help?
The operational reset will erase all the set function. The operation will not be reversible, so please consider
it carefully before you do this.
Problem Try this:
Your brand or device is not listed
in the code list?
Your URC doest not operate
your device?
Your URC does not work
suddenly after setup veri
fi ed ok.
Your URC is not performing
commands properly?
Your URC does not respond after
pressing a key.
The LED indicator blinks or keeps
lighting during the normal use
(not during the setting).
8 Back light (optional)
1.
Pressing LIGHT key can enable/disable the back light function.
2.
The initial status is disabled.
3.
When back light function enables, press any key, the light will turn on for a while and will be keeping on
if the function keys is pressed.
4.
When this function disables, backlight remains off.
You even can set the backlight time after a key is pressed by the following steps:
1.
Press the SET button fi rst and hold it down while pressing any of device, LED lights, release both buttons.
2.
Then, one after another, pressing the below three digits will set the backlight time as below.
a.
Try the QUICK SEARCH.
b.
Try the AUTO SEARCH.
a.
Check the power of the batteries.
b.
Try all the code list for your brand.
c.
Try the QUICK SEARCH.
d.
Try the AUTO SEARCH.
a.
Check the power of batteries.
b.
Make sure your URC be under the correct seletecd device (if
not, please press the selected device key).
a.
You may be using a wrong code, try to re-setup your URC with
another code listed under your brand or start the search method
to locate the proper code.
b.
Your URC has the main function but not all the function of
your original remote control.
c.
Pressing any keys twice without the batteries, and then install
the batteries and reset the URC.
a.
Make sure you are using a new battery.
b.
Aiming the URC at your device.
a.
Replace the batteries with 2 fresh, new AAA Alkaline
batteries.