The verifier is emitting a continuous high pitched squeal – what should I
do?
This happens when the batteries have run low. Remove the batteries and either
replace or recharge them (if rechargeable).
How do I change the language used by the PV-1072?
Switch off the verifier. Switch on the verifier and let it initialise.
Press
Menu/Select
once
Press
Scroll down
twice
Press
Menu/Select
once (you will see a number on the second line of the display
which is the averaging number)
Press
Scroll down
three times
Press
Menu/Select
once
Use the
Scroll up
and
scroll down
buttons until the chosen language is shown on the
second line of the display
Press
Menu/Select
to confirm the language
Press
Clear/Back
twice to return to the
Ready to scan
Message.
Frequently asked questions
www.axicon.com
Page 16 of 24
Axicon Auto ID Limited | PV-1072 operating manual | June 2017
