11
S
Y
S
TEM C
OMPONENT
S
C
ONTR
OLLER
MAINTENANCE
REV0303HC50011217
OPERA
TION
C
OMMISSIONING
PRIMAR
Y INSPECTION
PRIMING
O
VER
VIEW
AFC Fuel Additive
The use of AXI International AFC-705/710 Fuel Additive is an essential part of any tank cleaning and fuel polishing procedure,
as AFC can more rapidly and efficiently decontaminate and clean the entire fuel system. The additive is best introduced into
the process after Fine Filtration Mode. Before dosing the tank with AFC-705/710, remove as much of the sludge and free
water as possible. Adding AFC-705/710 to the tank will speed up the cleaning process by breaking down and dissolving the
sludge covering the tank walls and bottom.
AFC-705/710 will decontaminate areas and sections of the tank that are out of reach of the suction hose. It is recommended
to use a higher concentration of one to twenty five hundred (1:2500) instead of one to five thousand (1:5000) for the first
treatment. This has proven to be very helpful in accelerating the rate of dissolving sludge. Higher doses may be necessary,
depending on contamination level of the fuel. AFC-705/710 is a full spectrum fuel additive, containing a combustion catalyst,
surfactant (705), detergent, dispersant, corrosion inhibitor, lubricity enhancers, and a fuel stabilizer that eliminates the need
for expensive, toxic biocides.
After Fuel Polishing Process
1. Stabilize the Fuel
AFC-705/710 will stabilize the fuel in tanks used for long-term fuel storage. AFC-705/710 will maintain fuel quality and
prevent formation of sludge for up to twelve months. Added after the fuel polishing process, it is not necessary to add
more AFC-705/710 until additional fuel is added into the tank, or an environmental condition for the fuel has been altered
(introduction of water or other contamination)
2. Prevent Water from Accumulating
The use of AXI Water Eliminators, or tank breathers, will prevent water from accumulating in the tank. The water eliminators
will absorb and remove any water from condensation or other sources. Preventing water accumulation eliminates microbial
growth and the need for toxic biocides.
3. Monitor Fuel Quality
Liquid-Cult Fuel Test Kits are ideal for monitoring your fuel supply for microbial contamination. The tests provide indication
of bacterial and fungal activity.
4. Intelligent Fuel Management Solutions
AXI International Intelligent Fuel Management Solutions
significantly lower operating costs, save fuel, eliminate periodic
tank cleaning and the build up of solids, sludge, and acids. AXI International Technology enhances personnel safety and
addresses environmental concerns by preventing the need for costly toxic biocides. Larger capacity Mobile and Stationary
Tank Cleaning Systems are available.
! IMPORTANT ! It is recommended that only qualified, experienced personnel, familiar with this equipment,
who have read and understood all the instructions in this manual should operate and maintain the system.
! WARNING ! Do not use with gasoline, solvents, corrosive liquids, food liquids or other liquids having a
flash point less than 100°F. Use with gasoline or use with any flammable liquids at a temperature exceeding
their flash point, presents an immediate explosion and fire hazard
Summary of Contents for MTC HC-50
Page 23: ...NOTES...
