REV0302COM010120
9
Controller
Setting the Current Date and Time
1.
Press and hold the ‘CLOCK’ button.
2.
Proceed to press sequentially, ‘DAY’, ‘HOUR’ and ‘MIN’ button to adjust clock of timer to correct date, hour and
minute.
Programming the Timer
1.
Press the ‘TIMER’ button. LCD screen will switch to the first timer (1ON)
2.
Press ‘DAY’ as often as required to select any of the 15 combinations of days that suit your application
3.
Press ‘HOUR’ and ‘MIN’ respectively to set desired start time for 1ON
4.
Press ‘TIMER’ to switch to 1OFF
5.
Press ‘DAY’ as often as required to select the same combinations of days as in step 2 (must be consistent)
6.
Press ‘HOUR’ and ‘MIN’ respectively to set desired stop time for 1OFF
7.
Repeat procedure (step 1 through 6) if you would like to set several timers
8.
When finished programming press ‘CLOCK’
To review the program press ‘TIMER’ button repeatedly to go through all 8 timers.
To activate the timer program, make sure to press ‘MANUAL’ button will the display indicated you are in AUTO mode.
Please call AXI International with any questions.
Summary of Contents for FPS Compact Series
Page 2: ...REV0302COM010120 1...
