X-Series aXess 700-560-01E
Access & Arming Reader
Table 5: Access & Arming Reader
Action
Description....
ACCESS & ARMING READER
Red
Yellow
Green
Beeper
Factory Reset
All 3 LED's flashing in sync
None
Enrol Mode
Flashing in sync with
Green LED
Flashing out of sync
with Red/Green LED's
Flashing in sync
with Red LED
Single beep when any tag swiped
Idle
Following Partition's
ARM LED
ON if comms to panel
is good.
Following Relay
None
Learn Tag Mode
Following Partition's
ARM LED
ON if comms to panel
is good.
Flashing
Single beep when tag swiped
Access Granted
(Relay On)
Following Partition's
ARM LED
ON if comms to panel
is good.
Following Relay (On
whilst Relay is On -
Strike Time)
Single beep when valid tag swiped
Access Denied
Solid On for 2s
ON if comms to panel
is good.
Off
Failed Beep
Door Forced
Solid On for 2s
ON if comms to panel
is good.
Off
Failed Beep (if door switch
connected and configured) and X-
Series will go into alarm
Door Left Open
Following Partition's
ARM LED
ON if comms to panel
is good.
Off
Door Left Open Beep (if door
switch connected and configured)
Tag held in field
(Arming Time)
Following Partition's
ARM LED
Slow Flash
Following Relay
None
Diagrams
Figure 2: Interface Inputs Wiring Diagram
Summary of Contents for X Wireless Series
Page 1: ...Installation Manual ...
