Replacement of a slave reader
1. Enter the programming mode of the slave reader to be replaced.
The programming mode is entered by pressing the programming button (the rightmost
round button) and entering of the programming code. (Default set to 112233).
2. Navigate to menu
Options > System and select Show reader ID.
3. Exit the programming mode
4. Enter programming mode of the master reader.
5. Navigate to menu
Options > System and select Uninstall reader.
6. Select the ID of the slave reader to be replaced.
7. Exit the programming mode
8. Follow the instructions in
Initialization of a new slave reader
About MIFARE DESFire EV2 tags
A MIFARE DESFire EV2 tag can only exist in one SOLO system at a time. If a tag is added to
another system, the tag will stop working in the previous system. DESFire EV2-tags can also be
used in systems where information not is spread by the tag, even if the tags are active in a SOLO
system.
The table below shows capabilities for carrying information for different memory capacities of the
DESFire cards/tags.
Memory Capacity
2kB
9 tags
4kB
89 tags
8kB
210 tags
9 (9)
ManualA66 SOLO
