UDR-plus with ASSA evacuation lock
l
When the evacuation handle is pulled, a connection is made that triggers
the alarm.
l
If the evacuation handle is reset, (the connection between terminal 1 and 2
disappears) and the lock bolt is extended (connection between terminal 3
and 4), the alarm will be reset.
l
The lock bolt causes a connection between C and NO when the bolt is
retracted, which generates a warning signal. The warning can be removed
by disconnecting the cable to terminal 7.
Terminal on UDR-Plus
Connects to
1
NO on magnet contact
2
C on magnet contact
3
NC on magnet contact
4
C on magnet contact
7
NO on magnet contact
9
+10 - 30 VDC
10
GND
16 (17)
Manual UDR Plus
