Axel Streamer RTX, User Manual, Page: 9 / 25

ENG
9
6. Pushing Get List ! button, you will see as follows:
To configure the “Streamer” you have to pay attention to DHCP server status detector . If DHCP
ACTIVE is displayed you can procede from step 7 . If the DHCP server status detector shows DHCP
NOT PRESENT procede from step 9 .
7. By clicking on device inside the list box you will have all the parameters of the item selected.
Parameters assigned to “Streamer” by DHCP server
Default parameters stored
in “Streamer” memory
“Streamer” device
selected
“Streamer”
device
DHCP server status detector
Decoding test utility
Audio decoding settings
Decoder settings
Encoder settings
GPIO settings