Axel Streamer RTX, User Manual, Page: 13 / 25

ENG
13
12. Press Get List ! button to refresh the display of “Streamer” selection.
13.
Selecting the “Streamer” device will show you the new network parameters. As you will see the
EEPROM parameters will be transferred to RAM column. This means that your “Streamer” can be
reached on the network through the new IP value stored.
14. Now you can test the decoder audio function using UDP Streaming Test utility. By clicking on the
START button of UDP Streaming Test there will be the streaming of an audio MP3 file to the IP
address of “Streamer” selected. The suond will be played through the headphone and the RCA pin
(Streamer only, not In-Streamer). The audio parameters, like volume, bass, treble and loudness can
be changed via the
Audio setting . The streaming will stop at the end automatically but yuo can stop
it in any moment by pressing the STOP button.
END OF INSTALLATION OF “STREAMER”