350-Watt Digital VHF LB Transmitter
Chapter 3, Installation and Setup Procedure
DT325B, Rev. 0
3-11
Table 3-10: Menu 30-1 – System Details Screen
This is first screen of the details screens. The
↓
and
↑
arrows allow you to scroll through the
different parameters of each device as shown in
Table 3-11
. Each System Component is a
different screen. The proper modules will be programmed for your system.
Table 3-11: Transmitter Device Parameters Detail Screens
System
Component
Parameter
Normal
Faulted
(Blinking)
D/C PIN ATTEN VOLTAGE
˜ .6V
N/A
OVERDRIVE FAULT
˜ 1.6V
N/A
AGC MODE
AUTOMATIC
N/A
ADAPTIVE EQUALIZATION
STATUS
RUNNING
N/A
MEASURED SIGNAL TO NOISE ˜ 32.6dB
N/A
PLL STATUS
LOCKED
N/A
SMTE310 INPUT STATUS
OK
N/A
DEMOD FUNCTION STATUS
OK
N/A
FX VERSION
˜ 1.013
N/A
Axciter Details
NB VERSION
˜ 0.029
N/A
D/C PIN ATTEN VOLTAGE
˜ 0.0
N/A
U/C PIN ATTEN VOLTAGE
˜ 1.6V
N/A
AFC 1 LEVEL
˜ 0.06V
N/A
INPUT STATUS
OK
N/A
OUTPUT STATUS
ON
N/A
AGC 1 LEVEL
˜ 0.32V
N/A
AGC 2 LEVEL
˜ 0.00V
N/A
PLL
XXXMHz
N/A
PLL STATUS
OK
FAULT
OVERDRIVE LEVEL STATUS
OK
FAULT
Upconverter
Details
CODE VERSION
1.6h or higher
N/A
System Control
Details
SUPPLY ENABLED FOR
xxx HOURS
N/A
Pushing the
↓
Down Arrow, after scrolling through all of the detail screens, will put you
back to Menu 30, Table 3-9. Push the ESC button to exit the Transmitter Device
Parameter Screens to Menu 12, Table 3-6, the Transmitter Device Parameter Access
Screen.
