Caution:
Optimum wake-up is only possible if you wear the wristband correctly during the night, with a
correctly installed, active sensor. If you do not wear the wristband, aXbo will activate its basic
alarm function and wake you like a conventional alarm clock!
2.3 Registration
Don’t forget to register your
S
leep.
P
hase.
A
larm.
C
lock on our website www.axbo.com in order to
receive further product news and updates.
6
7
2. First steps
We would like to congratulate you once again on the purchase of your aXbo, the world’s first
S
leep.
P
hase.
A
larm.
C
lock. Please follow the following steps to activate aXbo.
2.1 Activate aXbo – S
leep.
P
hase.
A
larm.
C
lock
Plug the aXbo
S
leep.
P
hase.
A
larm.
C
lock into the adapter. For its first charging cycle, you should
charge your aXbo
S
leep.
P
hase.
A
larm.
C
lock for a minimum of 8 hours.
2.2 Activate sensor
aXbo comes with a sensor for person 1 and a sensor for person 2. These can be differentiated
by the markings on the inside. Both sensors are delivered deactivated.
Activate sensor:
>>
Press
[push]
14
button on the wristband
continually for 5 seconds
After release, the display will show: SENSOR 1 ON / SENSOR 2 ON depending if the sensor for
person 1 or 2 was activated.
Slip the ergonomically designed sensor into the pocket on the inside of the terry towel wristband
of your choice with the arrow pointing towards your hand,
see fig. p. 7 >
Be sure to wear the wristband like you would a watch, with the sensor on the upper side of your
non-dominant arm (i.e. the left arm for right-handed persons and vice versa). The wristband
comes in two different sizes,
see chapter 6.3 p. 22.
Note:
Once the sensors are in position in the wristband you can monitor movements of person 1 and
person 2 easily on the display,
see control elements p. 3.
