Battery cover
4 AA Batteries
Screw position
Screw position
5. Preparing for Take Off
3. Assembling the Quadcopter
4. Recharging the Battery
1. Insert and attach the Landing Feet to the bottom of the Quadcopter. Fasten the screws using the
screwdriver into the screw holes to secure the Feet in place.
2. Insert and attach the Protective Guards to the Quadcopter. Fasten the screws using the screwdriver
into the screw holes to secure the Guards in place.
1. Please fly the Quadcopter in a spacious indoor area, or outdoors in nice weather. Keep clear of
people, animals, or obstacles to prevent injury or damage.
2. Insert the provided Li-po battery into the Quadcopter and turn on. The indicator light will begin
flashing. Place the Quadcopter on a flat level surface and begin syncing with the remote controller.
3. To sync the controller with the Quadcopter, first pull the left acceleration lever to its lowest position.
Now turn on the remote controller and push the lever to its highest position. Once again, pull the
left lever to its lowest position. There will be a beep and Quadcopter's indication lights will turn on.
The Quadcopter and the remote are now synced and you are ready for take off!
Insert the provided USB cable into a computer's USB socket and the red indication light will turn on. Now
connect the USB cable to the battery's cable or into the Quadcopter's charging port. The indicator light
will turn off and begin charging. When the red light turns on again, the battery is fully charged. Charging
time can take up to 100 minutes.
Insert the USB cable into the
charging port at the bottom of the
quadcopter
Insert the USB cable into the Battery's cable.
