H-110
3.
Press ON/OFF again. The display will flash the
required calibration weight.
4. Place the weight on the end of the hook and press
ON/OFF
when the weight is stable.
5. The display will show PASS and return to normal
weighing. If EEEE is displayed, try calibration again.
X. Troubleshooting
•
Problem:
Scale will not turn on
•
Solution:
Check the batteries
•
Problem:
Displayed weight fluctuates randomly
•
Solution:
Make sure your workspace is stable and
free of any air currents or vibration
•
Problem:
Displayed weight is inaccurate
•
Solution:
Perform a calibration adjustment
XI. Error Codes
1. OUTZ
- Zero range has shifted. Perform calibration
adjustment. If the problem persists, the load cell may
be permanently damaged due to overloading.
2. EEEEE
- Maximum capacity exceeded. Remove the
extra weight to avoid damaging the load cell.
3. No Display
- Batteries are low. Replace the
batteries.
