User Manual AWR Nebulizer MN-300/2
Page 6 of 32 (Version MN-300/2-EN-V3)
7.
Only use accessories certified by the distributing company of this device. Do
not attach accessories which are not recommended by the distributing
company.
8.
Do not open the case. Any repair or maintenance may only be performed by
a service provider who was qualified by the distributing company of this
device. Failure to comply results in loss of all warranty claims.
9.
The device and the accessories must not be used in case of visible damage or
defects. This device must not be operated if:
a.
The power cable or plug are damaged.
b.
The device is not working properly.
c.
The device has been dropped or damaged.
d.
The device has been dropped into water.
In such cases, the device has to be shipped to a service provider who was
qualified by the distributing company of this device for inspection and repair.
ATTENTION
1.
Check the remaining battery capacity before every use.
2.
Make sure before every use that the medication has been filled into the
nebulizer unit.
3.
Please make sure to always hold the AWR Nebulizer MN-300/2 during
nebulizing in a way that the liquid always directly touches the silver
membrane of the nebulizer unit. If an air bubble forms behind the metal
membrane or if no liquid touches the membrane, the control unit will switch
off automatically.
4.
Over the course of their uses, the nebulizer units can change their technical
properties (technical wear and tear). This can negatively affect the
properties of the produced aerosol. Furthermore, the nebulizer units should
be replaced regularly for reasons of hygiene. Depending on use frequency,
the nebulizer unit should be replaced by a new nebulizer unit after a
maximum use period of 1-3 months. Our recommendation:
a.
A monthly replacement for daily use.
b.
A replacement every three months at the latest.
5.
The device must not be used for purposes other than those listed on this
user manual.
6.
The control unit is exclusively powered by the internal rechargeable battery.
7.
During operation of this device, proper functioning of the nebulizer has to be
ensured and checked.
CAUTION
1.
Do not touch the aerosol generator within the nebulizer unit.
2.
Do not insert objects into the nebulizer unit or other openings..
3.
The USB port of the control unit exclusively serves as a port for the nebulizer
unit. Do not attach other standard USB cables to this USB port of the control
unit.
4.
To avoid damaging the product, the battery must exclusively be charged with
the original power adapter or the original USB charging cable.
5.
The power cable has to be kept away from heated surfaces.
