User Manual AWR Nebulizer MN-300/2
(Version MN-300/2-EN-V3)
Page 15 of 32
Step 5: Starting the nebulizing and performing the inhalation:
-
Breathe out first.
-
Then press the start/stop button to
start the aerosol production (not in
continuous mode).
-
Inhale the produced aerosol.
-
Release the start/stop button as soon
as the inhalation process is complete
(not in continuous mode).
-
Breathe out. Do not breathe out through the mouth piece but remove it from
your mouth when you breathe out.
-
Repeat this process until the filled liquid has fully been aerosolized. The
control unit will then switch off automatically.
NOTE
During each production phase for aerosol, the operating mode indicator lights up
blue for the whole duration of the aerosol production.
ATTENTION
Please make sure to always hold the AWR Nebulizer MN-300/2 during nebulizing
in a way that the liquid always directly touches the silver membrane of the
nebulizer unit. If an air bubble forms behind the metal membrane or if no liquid
touches the membrane, the control unit will switch off automatically.
Press
Start
Stop
