P14
a. Loosen adjustable knobs to allow awning to reset to original position. Then lightly tighten
knobs on both arm assemblies to help ensure rattlefree travel.Pull top arm assembly down
to verify knob is NOT too tight. Adjustable pitch arm as-sembly MUST still slide as normal.
see Pic.15
b. Keep CLEAR of arm assemblies while closing awning. Arm as-semblies will [fold / close]
against back channel. Failure to obey this warning could result in death or serious injury.
c. Press and hold toggle to retract (ON) position on (fixed/wired) remote awning switch until
awning is fully closed. Awning will automatically stop when button is released no matter
how far awning is extended/retracted.
4.Close Awning
5. Emergency function-Manual control
a. In particular case, if there is a power cut or motor damage, but the awning needs to be used,
the manual control system can be worked. Each awning is equipped with a motor crank at the
motor right side , Use our handle crank to hook the black crank and turn it clockwise or anti-
clockwise to close or open awning
b. Note that there should be no object to block the awning when it closed or opened. If the awn-
ing is blocked and the manual function continues, it will be damaged, which is not covered by
the warranty.
Remarks:
Manual control just an emergency function, please do not use this function when
motorized function on.
Handle crank
Max.extention
Pic.19
Pic.20
Summary of Contents for W5700
Page 1: ...W20180130EN ...
Page 2: ......