Motor limit position:
To control awning close or open max. position by adjusting the winding
number of the motor's positive and negative direction
Motor (DC 12V) limit position adjustment.
Upper hole control awning close
CLOSE
Bottom hole control awning open
OPEN
Remark:
In the following adjustment processing, please always pay attention to the state of awning, not
too much adjustment motor, only adjust slowly (0.5-1 turns every time), otherwise the motor will
completely lose its function.
Max.OPEN Position
1. Turn the switch to “OPEN” position , as shown in Pic.12
The awning begins to open;
2. When the awning can not be fully opened, insert the adjusting rod
into the bottom hole of motor, and adjust it to
“+”
direction
until it is completely open.
3. When the awning is fully open but the motor is still running, insert
the adjusting rod into bottom hole of motor and adjust to
the
“-“
direction until the motor stop running.
Completely Close Adjustment
1. Completely Close Adjustment
2. Turn the switch to the CLOSE position, as shown in Pic.14,
the awning starts to close;
3. When the awning can not be fully closed, insert the adjusting rod
into upper hole of the motor, and adjust to
"-"
direction. Until awning
completely close
4. When the awning is completely closed ,but the motor is still running,
insert the adjusting rod into upper hole of the motor and adjust to
"+"
direction until the motor stop running.
Step.10
11
Pic.11
Pic.12
Pic.13
Pic.14
Summary of Contents for W5700
Page 1: ...W20180130EN ...
Page 2: ......