Step.8
Step.9
a
b
a
b
After adjust motor limit position, Please open the awning completely, and remove the temporary
wires.Please Connect the power cord of the motor from the hole on the right side arm, then
connect with cable which put inside of the arm, and then hide the connector in the protection shell,
See Pic.8.
Step.7
Switch installation
Please open the hole in the car wall according to the switch bottom shell size.
Wiring instructions
1. Without LED light
a.
①
wiring
(+)
&
②
wiring
(-)
for the power cord, please connect with the car power supply.
b.
③
wiring &
④
wiring are for motor, please connect with motor cable
（
motor cable no
“+”
，
“-” differences
）
2. With LED light stripe
a.
①
wiring
(+)
&
②
wiring
(-)
for the power cord, please connect with the car power supply.
b.
③
wiring &
④
wiring are the parallel wires for controlling the motor and LED light , please
connect with motor and led light cable
（
motor and LED light cable need parallel connection
）
blue
white
black
red
Connect the motor to the car power cord and hide the connector in the protection shell to prevent
water intake.See Pic.9
motor cable
motor cable
power cable
protection shell
10
Pic.8
Pic.9
Pic.10
Summary of Contents for W5700
Page 1: ...W20180130EN ...
Page 2: ......