AwiWarn
1. Unscrew the plastic protective cap on the upper side of the housing
2. Take the AwiWarn out of the cardboard box and screw the white protective sleeve off the
measuring head
3. Protective cap and protective sleeve serve as transport protection, are no longer needed and
can be disposed of
4. Screw the AwiWarn into the housing from above until the sensor is firmly seated and the display
faces forward
NOTE
The packaging box of the AwiWarn also contains a magnetic pen, which is needed to operate the
transmitter on the sensor.
11.2 Required Space
The transmitter of the AwiWarn is positioned on the upper outside of the stainless steel housing, the
measuring head directly below it inside the housing. For information on the additionally required space
for the AwiWarn extension, please refer to the following illustrations.
67
