AWID Sentinel-Sense ADB-512, Installation & Operation Manual, Page: 14 / 15

ADB-512
4 INSTALLATION P
This section provides installatio
4.1 PARTS LIST
Verify that all items listed belo
o
Sentinel-Sense ADB-5
o
Documentation
4.2 PREPARATION FO
Familiarize yourself with the co
4.2.1 Bench Top Verif
It is always a good idea to
installation. The following are
static environment.

Connect ADB-512 to
provided in the demonst

Connect the power jack

Power up PC

Install demo software o

Activate demo software

Select COM port 1
commands.
- 14 - 7/
PROCEDURE
on and operation information for ADB-512 read
ow are present before starting the installatio
512
FOR INSTALLATION
connectors and pin out assignment of each I
fication
verify system operation before committing
e the necessary steps to test the reader’s

the RS-232 port of a PC through the
stration kit

ck from the wall plug power supply to reader


on PC

e and verify performance of the reader.

on top page then click “Connect”. Fol
7/19/2021
der modules.
n.
Qty=1
Qty=1
I/O connectors.
g to a full-scale
s operation in a

interface board

module




llow with some