ADB-512
3
INSTALLATION &
For ease of explanation, MPR
consists of ADB-512 and a hig
proof, UV stabilized housing ca
Example of a heat sink could
convection air flow. The screw
module on the heat sink.
3.1
GENERAL WIRING
ADB-512 requires 10-pin flat
using long (e.g., 10” or longe
source.
- 13 -
7/
& OPERATION GUIDELINES
R reader in this section refers to an RFID dev
gh performance circular polarized antenna i
case. The module should be installed on a h
be an aluminum plate of size 8”x8”x0.1” exp
ws at the bottom of module shall be used for
NG REQUIREMENTS
flex cable (FFC) to connect from the suppl
er) cables when connecting the unit from th
7/19/2021
vice that
inside a splash
heat sink.
posed to
r mounting the
ly source. Avoid
he power supply