11/13
Dirt Trap - Type: DN25 - DN100 / PN10
Operating Instructions
15
5. Hazard Warnings
The safety systems described and the safety instructions given in this instruction manual must be taken
into account and followed, respectively. The dirt trap is designed to be operated manually and locally.
CAUTION
Dirt trap, length and quality of the pipes has to meet the requirements. The
assembly is to be checked by qualifi ed personnel. The parameters listed on the
datasheet have to be adhered to at all times.
HAZARD
A risk of
burns
exists during the operation or maintenance if fl ow media are used
at temperatures exceeding 60°C.
5.2 Hazardous Area of the Dirt Trap
The area around the dirt trap has to be kept accessible for the operator.
CAUTION
The
hazardous area
for set-up, maintenance and repair work is 1 m around the
machine or vessel. The swivel range of the opening switch cabinet doors is to be
taken into account. The operator shall ensure that persons are prevented from
entering the
hazardous area
during motion sequences.
5.3 Installing Replacement and Wearing Parts
We express clearly that spare and wear parts that are not delivered by AWH, are neither inspected nor
certifi ed or released by AWH either. The installation and/or application of such products can, under these
circumstances, modify the constructional specifi ed properties of your machine in a negative way.
5.1 Hazards
NOTE
Damage caused by usage of non-original parts and equipment are excluded from
the liability by the company Armaturenwerk Hötensleben GmbH.