35
SUSPENSION SETTING TECHNIQUE
Camber adjustment rule:
Simultaneous both upper rods
0.5mm shortening (1/2 turn of both turnbuсkles) adds 1.0°
of
cam
b
er angle at constant caster.
Caster adjustment rule:
Simultaneous front upper rod
0.5mm elongation and rear upper rod 0.
5
mm shortening
adds 2.5° of caster at constant camber.
Wheelbase adjustment:
Use rear suspension caster change for this adjustment.
Adding 4°caster shortens wheelbase by 1mm.
U
se Ride
H
eight Gauge for
U
pstop
&
Downstop measuring.
Reactive Caster
setting
is
possi
b
le.
Use
SS3X4
screws
for Upstop and
Downstop setting.
Roll Center adjustment:
Use combinations of
SH0.5, SH1.0
and
SH1.75
Spacers
under
appropriate Pivot Balls and Ball Studs for
this adjustment.
Adjust these spacers for
Bump Steer control.
Caster measuring:
C
aster
angle°
=
(H1-H2)*1.5 for front
(H1-H2)*2.5 for rear
H
1
H
2
Align these faces of
P13
Ball Ends
after completion of all settings.
Attention!
