Copyright 2018, AWE. No part of this document may be reused or duplicated without the express permission of AWE/Secor Ltd. All rights reserved. Rev1.6
Remove the air box inlet duct by removing the
two T25 torx screws, shown by the arrows in
Figure 3
.
Slide the inlet duct toward the engine, lift up, and
remove completely.
Under the hood, remove the hood release lever
by depressing the retaining button located by the
arrow in
Figure 1.
Remove the upper radiator cover by lifting up at
the arrows in
Figure 2
-
1.
Lift and slide forward to
remove the cover completely.
NOTE:
Temporarily reinstall the hood
release lever. If the hood should ever close
without this in place, opening the hood
again will be difficult.
